Home › Vehicle Exterior › BODY WELD POINT › REAR FLOOR SIDE MEMBER
BM3210E _01 Vehicle Exterior _050433 BODY WELD POINT _0251832 REAR FLOOR SIDE MEMBER F

BODY WELD POINT  REAR FLOOR SIDE MEMBER  ASSEMBLY REPLACEMENT  


K131471

With the body lower back panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points

K131635


INSTALLATION


Symbol Meaning
K108823

Remove Weld Points
K108835

Assembly Mark

a.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


b.

For positioning of the new parts, align the installation standard holes of the rear floor side member sub-assembly rear and the member.

K131636C01
4.219,1.729 4.667,2.083 4.667,2.083 4.833,2.083 false 4.854,2 5.167,2.156 0.313,0.156 10 false *1
*1 REAR FLOOR SIDE MEMBER SUB-ASSEMBLY REAR - -


K131637


c.

After welding, apply undercoating to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.