Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM
NM3210E _58 Vehicle Interior _050101 SUPPLEMENTAL RESTRAINT SYSTEMS _0240661 OCCUPANT CLASSIFICATION SYSTEM CO CONTROL F

SUPPLEMENTAL RESTRAINT SYSTEMS  OCCUPANT CLASSIFICATION SYSTEM  CONTROL  OCCUPANT CLASSIFICATION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the occupant classification System have the following functions:

Component Function
Occupant Detection ECU Judges whether the front passenger seat is occupied based on signals from 2 occupant classification sensors and front passenger seat belt buckle switch (front seat inner belt assembly RH).
Occupant Classification Sensor (Front LH or Rear LH) The sensors are strain gauge type sensors that send signals to the occupant detection ECU in accordance with the weight of the occupant.
Front Passenger Seat Belt Buckle Switch (Front Seat Inner Belt Assembly RH) Detects if the front passenger seat belt is fastened.
Combination Meter Assembly SRS Warning Light Turns on to alert the driver when the airbag ECU assembly detects a malfunction in the airbag system.
AIRBAG ON/OFF Indicator Lights
·

Informs the driver whether the occupant detection ECU has put the instrument panel passenger airbag without door assembly, front seat cushion airbag assembly RH and front passenger outer belt assembly RH into an active state or inactive state.

·

If a malfunction occurs in the occupant detection system, the AIRBAG OFF indicator light and SRS warning light come on.





SYSTEM CONTROL


a.

Summary

i.

In the occupant classification system, the occupant detection ECU calculates the weight of the occupant based on signals from the occupant classification sensors.


ii.

The occupant detection ECU contains criteria value "A" to judge whether the seat is occupied by a child or is unoccupied in accordance with the signals from the 2 occupant classification sensors and front passenger seat belt buckle switch (front seat inner belt assembly RH), and criteria value "B" to judge whether the occupant is an adult or child (with child seat).


iii.

This system recognizes the occupant as a child or child seat if it detects a weight of less than "B", and disables the instrument panel passenger airbag without door assembly and front seat cushion airbag assembly RH.



b.

Unoccupied Judgment

i.

The occupant detection ECU makes an unoccupied judgment when the judgment value is lower than criteria value "A" and the front passenger seat belt buckle switch (front seat inner belt assembly RH) is off.


ii.

If the power switch is turned on (IG) in this state, the system performs an initial check, and illuminate the AIRBAG OFF indicator light. Then, the system prohibits the deployment of the instrument panel passenger airbag without door assembly and front seat cushion airbag assembly RH, and does not blink the seat belt warning light.

Y148885E04
0.5,0.75 2.302,0.958 1.802,0.208 10 false Occupant Detection ECU 0.5,1.167 4.969,1.375 4.469,0.208 10 false Unoccupied: Judgment Value < "A" and Seat Belt Buckle Switch is OFF 0.417,2.74 2.635,3.115 2.219,0.375 10 false Instrument Panel Passenger Airbag without Door Assembly 0.458,3.438 2.438,3.688 1.979,0.25 10 false - Front Passenger Side Squib 0.26,4.146 2.802,4.354 2.542,0.208 10 false Front Seat Cushion Airbag Assembly RH 0.281,4.5 2.781,4.74 2.5,0.24 10 false - Front Seat Cushion Airbag Squib RH 0.51,5.281 2.729,5.51 2.219,0.229 10 false Front Seat Airbag Assembly RH 0.552,5.646 2.5,5.844 1.948,0.198 10 false - Front Side Airbag Squib RH 0.417,6.49 2.833,6.74 2.417,0.25 10 false Front Seat Outer Belt Assembly RH 0.458,7.01 2.594,7.24 2.135,0.229 10 false - Front Pretensioner Squib RH 3.417,4.833 4.198,5.25 0.781,0.417 10 false Airbag ECU Assembly 5.604,2.479 6.396,2.708 0.792,0.229 10 false OFF Signal 5.042,3.052 6.917,3.26 1.875,0.208 10 false AIRBAG OFF Indicator Light 5.052,4.823 6.854,5.031 1.802,0.208 10 false AIRBAG ON Indicator Light 5.344,6.708 6.854,6.948 1.51,0.24 10 false Seat Belt Warning Light



c.

Child Seat or Child Judgment

i.

If the judgment value is lower than criteria value "B" and the front passenger seat belt buckle switch (front seat inner belt assembly RH) is ON, the occupant detection ECU judges that a child seat is installed.


ii.

If the judgment value is higher than criteria value "A", but lower than criteria value "B", and the front passenger seat belt buckle switch (front seat inner belt assembly RH) is OFF, the occupant detection ECU judges that the seat is being occupied by a child.


iii.

When the power switch is turned on (IG) under these conditions, the system performs an initial check and illuminates the AIRBAG OFF indicator light to indicate that the instrument panel passenger airbag without door assembly and front seat cushion airbag assembly RH have been deactivated.

Y148886E04
2.5,0.167 4.323,0.406 1.823,0.24 10 false Occupant Detection ECU 2.5,0.583 4.865,0.99 2.365,0.406 10 false Child Seat: Judgment Value < "B" and Seat Belt Buckle Switch is ON 2.5,1.25 4.958,1.667 2.458,0.417 10 false Child : "A" < Judgment Value < "B" and Seat Belt Buckle Switch is OFF 1.698,2.135 2.49,2.385 0.792,0.25 10 false OFF Signal 5.948,2.885 6.656,3.135 0.708,0.25 10 false ON Signal 0.313,3.354 2.542,3.75 2.229,0.396 10 false Instrument Panel Passenger Airbag without Door Assembly 0.375,4.063 2.333,4.344 1.958,0.281 10 false - Front Passenger Side Squib 0.198,4.594 2.792,4.875 2.594,0.281 10 false Front Seat Cushion Airbag Assembly RH 0.354,4.958 2.885,5.188 2.531,0.229 10 false - Front Seat Cushion Airbag Squib RH 0.458,5.469 2.625,5.719 2.167,0.25 10 false Front Seat Airbag Assembly RH 0.26,6.594 2.615,6.875 2.354,0.281 10 false Front Seat Outer Belt Assembly RH 0.333,7.115 2.427,7.354 2.094,0.24 10 false - Front Pretensioner Squib RH 3.365,5.083 4.135,5.469 0.771,0.385 10 false Airbag ECU Assembly 5,4.031 6.823,4.271 1.823,0.24 10 false AIRBAG OFF Indicator Light 5,6.25 6.823,6.49 1.823,0.24 10 false AIRBAG ON Indicator Light 0.49,5.802 2.469,6.031 1.979,0.229 10 false - Front Side Airbag Squib RH



d.

Adult Judgment

i.

After the occupant detection ECU judges that a child seat is installed, the AIRBAG OFF indicator light does not go off unless the front passenger seat belt buckle switch (front seat inner belt assembly RH) is turned OFF.


ii.

When the judgment value is higher than criteria value "B", the occupant detection ECU judges that the seat is occupied by an adult.


iii.

If the power switch is turned on (IG) in this state, the system performs an initial check and illuminates the AIRBAG ON indicator light, indicating that the instrument panel passenger airbag without door assembly, front seat airbag sub-assembly RH and front seat airbag assembly RH are active.

Y148887E04
1,0.917 2.719,1.156 1.719,0.24 10 false Occupant Detection ECU 1,1.417 2.885,1.667 1.885,0.25 10 false Adult: "B" < Judgment Value 5.604,2.542 6.781,2.771 1.177,0.229 10 false ON or OFF Signal 5,3.594 6.896,3.833 1.896,0.24 10 false AIRBAG OFF Indicator Light 4.99,6.052 6.885,6.292 1.896,0.24 10 false AIRBAG ON Indicator Light 0.333,2.875 2.531,3.26 2.198,0.385 10 false Instrument Panel Passenger Airbag without Door Assembly 0.406,3.573 2.427,3.823 2.021,0.25 10 false - Front Passenger Side Squib 0.156,4.094 2.75,4.313 2.594,0.219 10 false Front Seat Cushion Airbag Assembly RH 0.208,4.49 2.646,4.729 2.438,0.24 10 false - Front Seat Cushion Airbag Squib RH 0.448,4.979 2.552,5.198 2.104,0.219 10 false Front Seat Airbag Assembly RH 0.51,5.396 2.521,5.667 2.01,0.271 10 false - Front Side Airbag Squib RH 0.333,6.052 2.656,6.313 2.323,0.26 10 false Front Seat Outer Belt Assembly RH 0.448,6.615 2.479,6.875 2.031,0.26 10 false - Front Pretensioner Squib RH 3.365,4.677 4.125,5.115 0.76,0.438 10 false Airbag ECU Assembly 0.156,7.333 5.073,7.594 4.917,0.26 10 false *: Cannot be deployed when the front passenger seat belt has been unfastened. 2.99,4.271 3.156,4.469 0.167,0.198 10 false *



e.

After the occupant detection ECU judges that the occupant is an adult, and if the judgment value is determined as criteria value "A" or less according to occupant load movement and the front passenger seat belt buckle switch (front seat inner belt assembly RH) is off, the ECU continues adult judgment for approximately 20 seconds before switching to the unoccupied judgment.

Y100049E22
0.25,0.635 1.25,0.927 1,0.292 10 false Power Switch 0.25,1.552 1.125,1.906 0.875,0.354 10 false AIRBAG OFF Indicator Light 0.25,2.5 1.156,2.875 0.906,0.375 10 false AIRBAG ON Indicator Light 2.667,0.708 3.625,1.052 0.958,0.344 10 false Approximately 4 Seconds 1.438,0.469 2.635,0.656 1.198,0.188 10 false On 1.438,0.813 2.49,1.146 1.052,0.333 10 false Off 1.427,1.448 2.479,1.781 1.052,0.333 10 false On 1.438,1.802 2.49,2.135 1.052,0.333 10 false Off 1.427,2.438 2.479,2.771 1.052,0.333 10 false On 1.438,2.781 1.771,2.979 0.333,0.198 10 false Off 3.833,0.698 4.75,1.094 0.917,0.396 10 false Approximately 2 Seconds 2.698,1.948 3.75,2.281 1.052,0.333 10 false 4 Seconds 3.833,1.938 4.885,2.271 1.052,0.333 10 false 2 Seconds 3.906,3.083 6.677,3.583 2.771,0.5 10 false ON/OFF condition depends on the passenger detection result.


f.

The front passenger SRS items and indicator lights operate as follows according to the occupant classification:

Items Occupant Classification
Adult Child Child Seat Unoccupied Malfunction

○: Deploys

X: Does not deploy

Front Passenger SRS Components Front Airbag ○ X X X X
Seat Cushion Airbag ○* X X X X
Side Airbag ○ ○ ○ ○ ○
Seat Belt Pretensioner ○ ○ ○ ○ ○
AIRBAG ON/OFF Indicator Lights ON Indicator Light ON OFF OFF OFF OFF
OFF Indicator Light OFF ON ON ON ON

HINT:

*: Cannot be deployed when the front passenger seat belt has been unfastened.




DIAGNOSIS


a.

If the occupant detection ECU detects a malfunction in the occupant classification system, the occupant detection ECU stores the malfunction data in memory as Diagnostic Trouble Codes (DTCs). If the airbag ECU assembly detects a malfunction in the occupant detection ECU, the airbag ECU assembly illuminates the SRS warning light and AIRBAG OFF indicator light.


b.

The occupant detection ECU outputs 5-digit Diagnostic Trouble Codes (DTCs) to the Global TechStream (GTS).


c.

The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3. For details, refer to the Repair Manual.