Home › Suspension › REAR SUSPENSION › REAR SUSPENSION SYSTEM
NM3210E _53 Suspension _050257 REAR SUSPENSION _0241734 REAR SUSPENSION SYSTEM DE DETAILS F

REAR SUSPENSION  REAR SUSPENSION SYSTEM  DETAILS  COIL SPRING AND SHOCK ABSORBER  


CONSTRUCTION


a.

A low-pressure (N2) gas sealed rear shock absorber with a built-in high response type piston valve is used to achieve a high level of controllability, driving stability and ride comfort.


b.

A high response type piston valve provides damping force at very low shock absorber speeds. This enhances steering response and suppresses high-frequency oscillations resulting in enhanced ride comfort.


c.

A resin absorber cap is used to reduce weight.


d.

Spring insulators are provided at the top and bottom ends of the rear coil springs to ensure excellent vibration suppression.


e.

The spring rate of the coil spring is optimized to achieve excellent controllability and ride comfort.

X131096C01
0.76,1.104 1.344,1.104 true 2.583,2.292 3,2.292 true 0.75,3.729 1.417,3.729 true 4.917,1.083 5.083,1.083 5.083,1.083 5.344,1.49 true 4.885,2.958 5.219,2.958 true 4.833,3.896 5.25,3.896 true 5.5,3.5 6.167,3.5 true 5.667,2.333 6.167,2.333 true 5.583,1.521 6,1 6,1 6.167,1 true 0.563,1.021 0.875,1.177 0.313,0.156 10 false *1 0.563,3.646 0.875,3.802 0.313,0.156 10 false *2 3.021,2.198 3.333,2.354 0.313,0.156 10 false *3 4.74,1 5.052,1.156 0.313,0.156 10 false *4 4.708,2.885 5.021,3.042 0.313,0.156 10 false *5 4.656,3.823 4.969,4.021 0.313,0.198 10 false *6 6.198,3.385 6.51,3.583 0.313,0.198 10 false *7 6.177,2.219 6.49,2.417 0.313,0.198 10 false *8 6.188,0.885 6.5,1.083 0.313,0.198 10 false *9
*1 Rear Upper Coil Spring Insulator *2 Rear Lower Coil Spring Insulator
*3 Rear Coil Spring *4 Absorber Cap
*5 High Response Type Piston Valve *6 Base Valve
*7 Oil *8 Low-pressure (N2) Gas
*9 Oil Seal - -