Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
NM3210E _58 Vehicle Interior _050593 HEATING / AIR CONDITIONING _0244536 AIR CONDITIONING SYSTEM DE DETAILS F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  DETAILS  SERVO MOTOR  


CONSTRUCTION


a.

Individual servo motors are used for the fresh/recirculation damper, the mode switching damper, the driver side and front passenger side air mix control dampers and rear mode switching damper.


b.

A No. 1 air conditioning radiator damper servo sub-assembly that combines three types of servo motors (for the mode switching damper and for the air mix control damper of both the driver seat and front passenger seat) is used.


c.

A pulse pattern type servo motor that controls by communicating over the bus wire with the air conditioning amplifier assembly is used for each servo motor. Along with using pulse pattern type servo motors, smart connectors contain ICs that have such functions as communicating with the air conditioning amplifier assembly.


d.

The installation positions for the servo motors are on the side of the blower assembly for the fresh/recirculation damper control servo motor, and on the side of the air conditioning unit assembly for the No. 1 air conditioning radiator damper servo sub-assembly.

E338817C04
4.646,2.5 4.646,1.083 4.646,1.083 4.844,1.083 false 4.021,2.563 4.021,1.146 4.021,1.146 3.833,1.146 false 2.031,2.979 2.031,1.563 2.031,1.563 1.844,1.563 false 3.344,5.552 3.344,6.615 3.344,6.615 3.542,6.615 false 3.656,1.083 3.969,1.24 0.313,0.156 10 false *4 1.656,1.5 1.969,1.656 0.313,0.156 10 false *3 3.604,6.531 3.917,6.688 0.313,0.156 10 false *2 4.927,1.01 5.24,1.167 0.313,0.156 10 false *1
*1 No. 1 Air Conditioning Radiator Damper Servo Sub-assembly
·

Damper Servo (Mode Switching)

·

Damper Servo (Driver Side Air Mix) (Models for Europe)

·

Damper Servo (Front Passenger Side Air Mix) (Models for Europe)

·

Damper Servo (Air Mix) (Except Models for Europe)


*2 No. 2 Air Conditioning Radiator Damper Servo Sub-assembly (for Rear Mode Switching)
*3 No. 3 Air Conditioning Radiator Damper Servo Sub-assembly (for Mode Switching) *4 No. 1 Blower Damper Servo Sub-assembly (Fresh/Recirculation Damper)



e.

Pulse Pattern Type Servo Motor

i.

In contrast to the previous type of servo motor that detecs the position by way of a potentiometer's voltage, the pulse pattern type servo motor detects the relative position by way of the 2-bit on/off signals


ii.

The forward and reverse revolutions of this motor are detected by way of 2 phases, A and B, which output 4 types of patterns. The air conditioning amplifier assembly counts the number of pulse patterns in order to determine the stopped position.

Y128408E02
2.521,1.344 3.042,0.396 true 6.271,2.313 5.802,2.979 5.802,2.979 6.271,1.948 true 1.521,3.583 2.063,3.688 true 1.708,3.844 2.063,3.844 true 1.542,4.104 2.063,4.021 true 3.927,3.552 4.448,3.469 true 3.917,4 4.458,4.104 true 3.094,0.313 5.729,0.646 2.635,0.333 10 false Rotation Direction of Printed Circuit Board 3.188,1.917 4.104,2.198 0.917,0.281 10 false Pattern Width 0.167,1.24 0.76,1.542 0.594,0.302 10 false Phase B 0.167,1.5 0.76,1.802 0.594,0.302 10 false Phase A 0.156,1.75 0.75,2.052 0.594,0.302 10 false Common 4.823,1.698 5.594,1.927 0.771,0.229 10 false Phase A: + 4.604,2.042 5.583,2.292 0.979,0.25 10 false Common: GND 4.823,2.375 5.594,2.604 0.771,0.229 10 false Phase B: + 5.26,3.01 6.208,3.292 0.948,0.281 10 false Pattern Switch 1.948,3.042 4.74,3.375 2.792,0.333 10 false Rotation Direction of Printed Circuit Board 0.74,3.5 1.51,3.729 0.771,0.229 10 false Phase A: + 0.719,3.76 1.698,4.01 0.979,0.25 10 false Common: GND 0.74,4.021 1.51,4.25 0.771,0.229 10 false Phase B: + 4.51,3.375 6.073,3.74 1.563,0.365 10 false Printed Circuit Board 4.531,4.031 6.125,4.375 1.594,0.344 10 false Pattern (Conductive Part) 2.667,5.448 4.052,5.74 1.385,0.292 10 false Pattern Width 2.81° 1.146,4.302 1.917,4.531 0.771,0.229 10 false Pattern No. 1.292,4.563 2.063,4.792 0.771,0.229 10 false Phase A 1.292,4.896 2.063,5.125 0.771,0.229 10 false Phase B