Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
NM3210E _58 Vehicle Interior _050593 HEATING / AIR CONDITIONING _0244536 AIR CONDITIONING SYSTEM DE DETAILS F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  DETAILS  AIR CONDITIONING THERMISTOR  


CONSTRUCTION


a.

A humidity sensor, in which the glass temperature sensor, glass surroundings temperature sensor and glass humidity sensor are integrated, is used.


b.

The glass temperature sensor detects the surface temperature of the windshield using the built-in thermistor attached to the back of the sensor board, and outputs the signal to the air conditioning amplifier assembly.


c.

The gases surroundings temperature sensor detects the air temperature near the windshield using the built-in thermistor, and outputs the signal to the air conditioning amplifier assembly.


d.

The glass humidity sensor calculates a change in the electrostatic capacity between the electrodes by allowing the humidity-sensing film to absorb and desorb moisture in the cabin, and outputs the signal to the air conditioning amplifier assembly.