Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › SFI SYSTEM
NM3210E _51 Engine / Hybrid System _049523 2ZR-FXE ENGINE CONTROL _0249540 SFI SYSTEM DE DETAILS F

2ZR-FXE ENGINE CONTROL  SFI SYSTEM  DETAILS  VVT-i CONTROL  


OPERATION


a.

Based on engine speed, intake air volume, throttle position and engine coolant temperature, the ECM calculates optimal valve timing for all driving conditions. The ECM also controls the camshaft timing oil control valve assembly. In addition, the ECM uses signals from the cam position sensor and the crank position sensor to detect the actual valve timing, thus providing feedback control to achieve the target valve timing.

W111644E02
5.469,1.063 5.667,0.323 5.667,0.323 5.896,0.323 true 3.948,4.052 4.406,4.25 0.458,0.198 10 false ECM 0.427,0.604 1.865,0.854 1.438,0.25 10 false Crank Position Sensor 0.406,1.042 1.75,1.479 1.344,0.438 10 false Mass Air Flow Meter Sub-assembly 0.354,1.781 1.896,2 1.542,0.219 10 false Throttle Body Assembly 0.375,2.156 1.906,2.417 1.531,0.26 10 false Throttle Position Sensor 0.24,2.667 2.01,3.125 1.771,0.458 10 false Engine Coolant Temperature Sensor 0.438,3.51 1.813,3.781 1.375,0.271 10 false Cam Position Sensor 0.427,4.333 1.823,4.573 1.396,0.24 10 false Vehicle Speed Signal 3.458,0.802 4.771,1.083 1.313,0.281 10 false Target Valve Timing 3.792,2.854 4.5,3.115 0.708,0.26 10 false Correction 3.5,3.385 4.771,3.646 1.271,0.26 10 false Actual Valve Timing 5.958,0.24 6.656,0.667 0.698,0.427 10 false Duty-cycle Control 5.906,0.958 6.969,1.521 1.063,0.563 10 false Camshaft Timing Oil Control Valve Assembly


b.

When the camshaft timing oil control valve assembly is operated as illustrated below by the advance signal from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction.

W130231C02
0.458,0.677 0.667,0.677 0.667,0.677 1.073,1.156 true 0.344,2.563 0.552,2.563 0.552,2.563 0.76,2.021 true 4.49,2.719 5.083,2.719 true 0.281,0.573 0.469,0.771 0.188,0.198 10 false *a 0.167,2.458 0.354,2.656 0.188,0.198 10 false *b 4.313,2.615 4.5,2.813 0.188,0.198 10 false *c 5.021,2.781 5.208,2.979 0.188,0.198 10 false *d 5.25,2.771 5.438,2.969 0.188,0.198 10 false *e 6.26,2.115 6.448,2.313 0.188,0.198 10 false *1
*1 ECM - -
*a Vane *b Rotation Direction
*c Oil Pressure *d In
*e Drain - -



c.

When the camshaft timing oil control valve is operated as illustrated below by the retard signal from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction.

W130232C02
0.865,1.26 0.604,0.531 0.604,0.531 0.906,0.531 true 0.51,2.635 0.677,2.635 0.677,2.635 0.927,2.219 true 4.344,2.688 4.802,2.688 true 6.188,2.115 6.385,2.302 0.198,0.188 10 false *1 0.938,0.427 1.135,0.646 0.198,0.219 10 false *a 0.333,2.531 0.542,2.729 0.208,0.198 10 false *b 4.177,2.583 4.354,2.781 0.177,0.198 10 false *c 4.74,2.781 4.917,2.979 0.177,0.198 10 false *d 4.958,2.771 5.156,2.969 0.198,0.198 10 false *e
*1 ECM - -
*a Vane *b Rotation Direction
*c Oil Pressure *d Drain
*e In - -



d.

After reaching the target timing, the valve timing is held by keeping the camshaft timing oil control valve assembly in the neutral position unless the driving conditions change. This maintains the valve timing at the desired target position and prevents the engine oil from running out when unnecessary.