FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: LHD models *2: RHD models |
|
| Main Body ECU (Multiplex Network Body ECU) | Receives various signals and turns off the exterior lights. |
| Headlight Dimmer Switch Assembly | Outputs a light control signal and transmits it to the main body ECU (multiplex network body ECU). |
| Front Door Courtesy Light Switch Assembly (LH*1/RH*2) | Detects whether a door is open or closed and transmits a signal to the main body ECU (multiplex network body ECU). |
| Headlight ECU Sub-assembly LH/RH | Shuts down power to the headlights and clearance lights. |
| Instrument Panel Junction Block Assembly
·
TAIL Relay |
Shuts down power to the taillights and license plate lights. |
SYSTEM CONTROL
Operating Condition
The light auto turn-off system operates as follows:
| Function | Outline |
|---|---|
| Driver Door-linked | When all of the following conditions are met, the exterior lights automatically turn off:
·
The power switch is turned from on (IG) to off. ·
The headlight dimmer switch assembly is in the tail position. ·
The driver door is closed and then opened. |
| Delay Function | When all of the following conditions are met, the exterior lights automatically turn off after 30 seconds:
·
The power switch is turned from on (IG) to off. ·
The low beam headlights are on (light control switch is in the head or AUTO position). ·
All doors are closed after any of the doors are opened. |
| Key-linked Function | When the delay function is active and the following condition is met, the exterior lights turn off immediately:
·
The lock button on the key is pushed after all doors are locked. |