FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: LHD models *2: RHD models |
|
| Main Body ECU (Multiplex Network Body ECU) | Receives various signals and illuminates the headlights, taillights, parking lights, side marker lights and license plate lights. |
| Automatic Light Control Sensor | Detects the ambient light level. |
| Headlight Dimmer Switch Assembly | Outputs a light control signal to the main body ECU (multiplex network body ECU). |
| Headlight ECU Sub-assembly LH/RH | Supplies power to the headlights. |
| Instrument Panel Junction Block Assembly
·
TAIL Relay |
Supplies power to the taillights and license plate lights. |
| Front Door Courtesy Light Switch Assembly (LH*1/RH*2) | Detects whether a door is open or closed and transmits a signal to the main body ECU (multiplex network body ECU). |
SYSTEM CONTROL
Operating Condition
The automatic light control system operates as follows:
| Function | Outline |
|---|---|
| Headlights and Taillights turn on | When all of the following conditions are met, the headlights, taillights, parking and side marker lights, and license plate lights automatically turn on:
·
The ambient light is dark or momentarily bright. ·
The power switch is turned on (IG). ·
The light control switch is in the AUTO position. |
| Headlights and Taillights turn off | When the ambient light is bright, the exterior lights automatically turn off. |
DIAGNOSIS
When the main body ECU (multiplex network body ECU) detects a malfunction in the automatic light control system, Diagnostic Trouble Codes (DTCs) are stored in memory.
The DTCs can be read using the GTS (Global TechStream). For details, refer to the Repair Manual.