Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM
NM3210E _54 Brake _051875 PARKING BRAKE _0250235 PARKING BRAKE SYSTEM DE DETAILS F

PARKING BRAKE  PARKING BRAKE SYSTEM  DETAILS  BRAKE CALIPER  


CONSTRUCTION


a.

Parking brake consists of a crank lever, actuator and sleeve nut. The crank lever transmits the depression force of the parking brake pedal to the input shaft of the actuator. The actuator converts the rotational force of the input shaft to a linear force that pushes the adjusting bolt. The sleeve nut transmits the force of the adjusting bolt to the piston.


b.

The adjuster consists of an adjusting bolt and sleeve nut. The adjusting bolt adjusts to provide the increased length that is required as the piston protrudes due to pad wear. Also, a bearing is provided so that the sleeve nut rotates smoothly.

Parking Brake Components
X131267C01
1.031,0.927 1.26,0.302 1.26,0.302 1.479,0.302 true 1.208,2.49 1.469,2.49 1.469,2.49 1.76,1.74 true 3.458,0.458 3.719,0.458 3.719,0.458 4,1.354 true 4.26,1.385 4.49,0.76 4.49,0.76 4.708,0.76 true 4.625,1.729 4.854,1.104 4.854,1.104 5.073,1.104 true 6.063,2.208 6.292,1.583 6.292,1.583 6.51,1.583 true 1.552,0.229 1.865,0.385 0.313,0.156 10 false *1 0.99,2.427 1.302,2.583 0.313,0.156 10 false *2 3.24,0.375 3.552,0.531 0.313,0.156 10 false *3 4.771,0.688 5.083,0.844 0.313,0.156 10 false *4 5.146,1.042 5.458,1.198 0.313,0.156 10 false *5 6.573,1.521 6.885,1.677 0.313,0.156 10 false *6 2.708,2.677 3.021,2.833 0.313,0.156 10 false *a
*1 Piston *2 Sleeve Nut
*3 Adjusting Bolt *4 Actuator
*5 Input Shaft *6 Crank Lever
*a Bearing - -




OPERATION


a.

Operation of the parking brake mechanism

i.

The crank lever rotates via the parking brake cable when the parking brake pedal is depressed.


ii.

The crank lever rotates the input shaft which moves the check balls to a shallower part of their groove within the input shaft. The adjusting bolt is pushed out proportional to the change in the depth of the groove.


iii.

The adjusting bolt pushes the brake pad against the disc rotor via the sleeve nut and piston and subsequently generates braking force.

X130806C01
3.438,2.417 2.854,0.729 2.854,0.729 2.604,0.729 true 3.656,2.5 2.927,0.427 2.927,0.427 2.677,0.427 true 4.646,2.49 3.917,0.417 3.917,0.417 3.667,0.417 true 5.604,1.198 5.385,1.198 5.385,1.198 4.969,2.677 true 3.792,2.802 3.25,4.25 3.25,4.25 3,4.25 true 5.219,3.906 5.219,3.021 true 2.396,0.646 2.708,0.802 0.313,0.156 10 false *1 2.458,0.323 2.771,0.479 0.313,0.156 10 false *2 3.458,0.323 3.771,0.479 0.313,0.156 10 false *3 5.677,1.125 5.99,1.281 0.313,0.156 10 false *4 2.781,4.156 3.094,4.313 0.313,0.156 10 false *5 5.125,3.958 5.438,4.115 0.313,0.156 10 false *6
*1 Piston *2 Sleeve Nut
*3 Check Ball *4 Input Shaft
*5 Adjusting Bolt *6 Crank Lever




b.

Adjuster Operation

i.

When the brake pad has worn and the clearance between the brake pad and disc rotor is certain value or more, the sleeve nut is rotated along the thread of the adjusting bolt by brake fluid pressure. With this, the clearance caused by brake pad wear is automatically adjusted. Also, the sleeve nut has a clutch that engages during the adjustment to prevent excessive rotation.

X130807C01
3.448,2.406 2.781,0.958 2.781,0.958 2.479,0.958 true 4.333,1.094 4.063,1.094 4.063,1.094 3.635,2.469 true 3.615,2.75 3.188,3.927 3.188,3.927 2.906,3.927 true 2.271,0.865 2.583,1.021 0.313,0.156 10 false *1 4.396,1.021 4.708,1.177 0.313,0.156 10 false *2 2.698,3.844 3.01,4 0.313,0.156 10 false *3
*1 Piston *2 Sleeve Nut
*3 Adjusting Bolt - -