Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM
NM3210E _51 Engine / Hybrid System _050432 HYBRID / BATTERY CONTROL _0242220 HYBRID BATTERY SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  DETAILS  HV BATTERY  


CONSTRUCTION


a.

The HV battery assembly mainly consists of the HV battery (Battery Modules), HV battery thermistor, hybrid battery junction block assembly, battery cooling blower assembly, battery smart unit (battery voltage sensor), HV battery terminal block and service plug grip.


b.

The HV battery uses plastic container type cells. As a result, high power density, lightweight construction, and longevity have been accomplished at high levels.


c.

The battery cooling blower assembly is used as a dedicated cooling system to ensure that the HV battery performs properly, despite it generating significant heat during the repetitive charge and discharge cycles.

W132082C02
5.25,4.083 5.25,3.333 5.25,3.333 5.417,3.333 true 5.667,4.25 5.667,3.667 5.667,3.667 5.833,3.667 true 1.667,5 1.667,4.25 1.667,4.25 1.833,4.25 true 3.583,5.917 3.583,5.167 3.583,5.167 3,5.167 true 3.281,4.698 3.281,3.948 3.281,3.948 3.448,3.948 true 2.583,5.333 2.583,6.333 true 4.531,5.063 4.531,5.74 true 1.885,4.177 2.198,4.333 0.313,0.156 10 false *1 3.479,3.896 3.792,4.052 0.313,0.156 10 false *2 5.438,3.26 5.75,3.417 0.313,0.156 10 false *3 5.833,3.615 6.146,3.771 0.313,0.156 10 false *4 2.49,6.375 2.802,6.531 0.313,0.156 10 false *5 3.479,5.948 3.792,6.104 0.313,0.156 10 false *6 4.479,5.823 4.792,6.021 0.313,0.198 10 false *7
*1 Battery Cooling Blower Assembly *2 HV Battery Thermistor
*3 HV Battery Terminal Block *4 Battery Smart Unit (Battery Voltage Sensor)
*5 Hybrid Battery Junction Block Assembly *6 Service Plug Grip
*7 HV Battery (Battery Modules) - -



d.

The HV battery consists of 28 separate battery modules. They are connected to each other in series through 2 bus bar modules.


e.

These battery modules are each made up of 6 cells. The HV battery has a total of 168 cells (6 cells x 28 modules) and a nominal voltage of 201.6 V (1.2 V x 168 cells).

W132256E01
1.76,2.573 4.656,2.781 2.896,0.208 10 true 28 Battery Module 5.438,1.313 6.688,1.958 1.25,0.646 10 false Hybrid Battery Junction Block Assembly 5.333,3.365 7.021,3.563 1.688,0.198 10 false Service Plug Grip 0.802,3.302 2.177,3.5 1.375,0.198 10 false : Bus Bar Module 4.99,0.521 6.833,0.885 1.844,0.365 10 false To Power Cable (Frame Wire)

1.

HV Battery Thermistor

1.

The HV battery thermistor is include the 3 HV battery temperature sensors and HV battery intake air temperature sensor.

2.

The hybrid vehicle control ECU optimally controls the cooling system so that the HV battery temperature can be within a specified range according to the temperature information that is received via the battery smart unit (battery voltage sensor).

W132086C02
2.667,1.75 2.667,0.833 2.667,0.833 2.917,0.833 true 4.104,1.49 4.104,0.573 4.104,0.573 4.354,0.573 true 5.469,1.115 5.469,0.365 5.469,0.365 5.719,0.365 true 2.99,3.323 2.99,2.573 2.99,2.573 2.74,2.573 true 4.76,2.917 4.76,1.208 true 2.938,0.781 3.25,0.938 0.313,0.156 10 false *a 2.917,3.323 3.229,3.479 0.313,0.156 10 false *b 4.406,0.51 4.719,0.667 0.313,0.156 10 false *a 5.75,0.313 6.063,0.469 0.313,0.156 10 false *a 4.708,2.979 5.021,3.177 0.313,0.198 10 false *1
*1 HV Battery Thermistor - -
*a HV Battery Temperature Sensor *b HV Battery Intake Air Temperature Sensor