Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE
NM3210E _59 Vehicle Exterior _050304 EXTERIOR PANELS / TRIM _0250800 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SAFETY FEATURES  


CONSTRUCTION


a.

Impact Absorbing Structure for Frontal Collision

i.

A structure that ensures collision energy absorption efficiency, dissipates impact and minimizes cabin deformation during a frontal collision has been achieved.

·

The front crash box and front side member sub-assembly absorb and disperse collision energy received from the front bumper reinforcement.

·

Collision energy applied to the front side member sub-assembly is transmitted to the front apron to cowl side member sub-assembly and cowl under section.

·

The front lower side member and lower side members absorb and disperse collision energy received from the radiator support lower cross member.

·

Collision energy applied to the lower side members is transmitted to the front suspension cross member and floor panel.

Y191011C01
1.417,2.583 1.417,1 1.417,1 1.667,1 true 3.667,2.833 3.667,0.333 3.667,0.333 3.833,0.333 true 5.583,2.667 6.167,0.417 6.167,0.417 6.333,0.417 true 2.167,3.5 2.167,4 2.167,4 2.417,4 true 3.75,3.667 3.75,4.167 3.75,4.167 4,4.167 true 4.917,3.75 4.917,4.25 4.917,4.25 5.167,4.25 true 5.75,3.5 5.917,4 5.917,4 6.167,4 true 1.677,0.938 1.99,1.094 0.313,0.156 10 false *1 3.875,0.271 4.188,0.427 0.313,0.156 10 false *2 6.375,0.333 6.688,0.49 0.313,0.156 10 false *3 2.448,3.927 2.76,4.083 0.313,0.156 10 false *4 4.052,4.104 4.365,4.26 0.313,0.156 10 false *5 5.198,4.188 5.51,4.344 0.313,0.156 10 false *6 6.188,3.938 6.5,4.094 0.313,0.156 10 false *7
*1 Front Bumper Reinforcement *2 Front Crash Box
*3 Front Side Member Sub-assembly *4 Radiator Support Lower Cross Member
*5 Front Lower Side Member *6 Lower Side Member
*7 Front Suspension Cross Member - -
V100136

Front Impact Energy
V100135

Dissipate


·

Front body pillars have been strengthened to optimize dispersal of collision energy to the rail panel, rocker panel and floor panel.

·

Collision energy applied to the front body pillar transmitted to the instrument panel reinforcement and cowl panel circular structure via the instrument panel reinforcement cowl side bracket.

Y191013C01
3.167,3.5 3.167,3.25 3.167,3.25 3.583,2.917 true 3.917,1.917 3.917,0.333 3.917,0.333 4.167,0.333 true 4.75,3.333 4.75,3.083 4.75,3.083 4.583,2.833 true 2.25,5.583 2.25,4.417 2.25,4.417 2.417,4.417 true 2.688,5.583 3.021,4.5 3.021,4.5 3.188,4.5 true 3.094,3.531 3.406,3.688 0.313,0.156 10 false *1 4.198,0.281 4.51,0.438 0.313,0.156 10 false *2 4.698,3.354 5.01,3.51 0.313,0.156 10 false *3 2.438,4.344 2.75,4.5 0.313,0.156 10 false *4 3.219,4.438 3.531,4.594 0.313,0.156 10 false *5
*1 Front Body Pillar *2 Rail Panel
*3 Rocker Panel *4 Cowl Panel
*5 Instrument panel Reinforcement - -
V100136

Front Impact Energy
V100135

Dissipate


·

Multiple reinforcements have been placed under the floor. The reinforcements help to reduce the amount of impact energy imparted on the front of the vehicle.

Y191015C02
5,0.917 5.333,0.167 5.333,0.167 5.667,0.167 true 5,2.917 5.5,3.667 5.5,3.667 5.833,3.667 true 5.708,0.104 6.021,0.26 0.313,0.156 10 true *a 5.823,3.583 6.135,3.74 0.313,0.156 10 true *a
*a Multiple Reinforcement - -
V100135

Dissipate - -


·

Front floor cross members have been placed front floor panel. Suppresses rocker penetration into the cabin during a frontal collision.

Y194825C02
6.167,2.5 4.75,2.5 4.75,2.5 3.25,3.083 true 6.167,1.083 4.75,1.083 4.75,1.083 3.25,0.75 true 6.24,1 6.552,1.198 0.313,0.198 10 false *a 6.208,2.427 6.521,2.625 0.313,0.198 10 false *a
*a Front Floor Cross Member - -
V100136

Front Impact Energy - -





b.

Impact Absorbing Structure for Side Collision

i.

A structure that ensures collision energy absorption efficiency, dissipates impact and minimizes cabin deformation during a side collision has been achieved.

·

Hot-stamped sheet steel is used for the roof cross reinforcement CTR, front body pillar outer reinforcement, rail outer reinforcement, center pillar outer reinforcement and center pillar hinge reinforcement.

·

A structure which uses the floor side member reinforcement and rocker inner side panel to efficiently transmit impact load during a side collision to the floor is used.

·

A structure which optimizes the placement of the rear door protection beam sub-assembly and rocker panel reinforcement to efficiently transmit impact load is used.

Y191016C01
0.042,4.417 2.667,6.167 2.625,1.75 2.75,4.417 5.417,6.167 2.667,1.75 5.5,3.333 7.083,6.667 1.583,3.333 4.25,1.167 5.75,0.25 5.75,0.25 6,0.25 true 2.417,3.833 2.417,3.583 2.417,3.583 3.167,2 true 3.333,3.583 3.333,3.333 3.333,3.333 3.917,1.417 true 1.083,4.833 1.083,4.583 1.083,4.583 1.25,4.583 true 1.333,4.917 1.333,5.333 1.333,5.333 1.5,5.333 true 3.583,5.667 3.583,5.917 3.583,5.917 3.75,5.917 true 6.115,4.406 6.115,3.49 6.115,3.49 6.281,3.49 true 5.625,6.354 5.625,6.188 5.625,6.188 6.125,5.438 true 6.177,4.458 6.177,4.875 true 6.75,4.833 6.75,5.917 true 3.802,5.844 4.115,6 0.313,0.156 10 false *1 2.333,3.885 2.646,4.042 0.313,0.156 10 false *2 3.26,3.615 3.573,3.771 0.313,0.156 10 false *3 1.292,4.531 1.604,4.688 0.313,0.156 10 false *4 1.542,5.271 1.854,5.427 0.313,0.156 10 false *5 6.302,3.417 6.615,3.573 0.313,0.156 10 false *6 6.708,5.958 7.021,6.115 0.313,0.156 10 false *7 5.563,6.427 5.875,6.583 0.313,0.156 10 false *8 6.031,0.198 6.188,0.354 0.156,0.156 10 false *1 6.104,4.917 6.417,5.073 0.313,0.156 10 false *6 3.979,1.688 4.156,1.844 0.177,0.156 10 true A 4.594,1.531 4.771,1.688 0.177,0.156 10 true A 3.292,0.458 3.469,0.615 0.177,0.156 10 true B 3.698,0.354 3.875,0.51 0.177,0.156 10 true B 4.958,2.76 5.135,2.917 0.177,0.156 10 true C 4.875,1.802 5.052,1.958 0.177,0.156 10 true C 0.083,4.438 0.396,4.635 0.313,0.198 10 false *a 2.813,4.479 3.125,4.677 0.313,0.198 10 false *b 5.552,3.365 5.865,3.563 0.313,0.198 10 false *c
*1 Roof Cross Reinforcement CTR *2 Front Body Pillar Outer Reinforcement
*3 Rail Outer Reinforcement *4 Center Pillar Outer Reinforcement
*5 Center Pillar Hinge Reinforcement *6 Rocker Panel Reinforcement
*7 Door Protection Beam Bracket *8 Rear Upper Rocker Outer Panel
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section - -
V100136

Side Impact Energy - -





c.

Roof Crush Resistance

i.

Loads are supported by the front body pillar, center body pillar, roof and header during a roof crush.

·

Hot-stamped sheet steel is used for the roof cross reinforcement CTR during a roof crush.

·

High-tensile strength sheet steel is used for the front body pillar inner reinforcement and front header lower panel.

·

An integrated construction between the upper and lower parts of the center body pillar are used. For both of them, high-tensile strength sheet steel is used, thus ensuring the rigidity of the center body pillar during a roof crush.

Y191020C02
2.833,0.917 2.833,0.25 2.833,0.25 3,0.25 true 2,1.333 2,0.667 2,0.667 2.25,0.667 true 3,1.333 3.417,0.25 3.417,0.25 3.667,0.25 true 3.917,1 4.417,0.25 4.417,0.25 4.667,0.25 true 2.167,3.5 2.167,3.167 2.167,3.167 2.583,2.583 true 4.188,3.542 4.188,3.208 4.188,3.208 3.271,1.708 true 2.292,0.615 2.604,0.771 0.313,0.156 10 false *1 3.688,0.219 4,0.375 0.313,0.156 10 false *2 3.01,0.208 3.323,0.365 0.313,0.156 10 false *3 4.698,0.208 5.01,0.365 0.313,0.156 10 false *4 2.042,3.552 2.354,3.708 0.313,0.156 10 false *1 4.104,3.573 4.417,3.729 0.313,0.156 10 false *3
*1 Front Body Pillar Inner Reinforcement *2 Front Header Lower Panel
*3 Front Header Extension *4 Roof Cross Reinforcement CTR





d.

Reduction Pedestrian Head Injury

i.

The following shape is used for around the front body, thus maintaining necessary rigidity and aiming for a reduction of impact against a pedestrian in a collision with a pedestrian.

·

The hood panel uses a structure which ensures an impact absorption stroke at the front between the upper radiator support and hood inner panel reinforcement in order to reduce the impact to the pedestrian whose head struck the hood.

Y191017C02
0.365,2.083 6.135,4.729 5.771,2.646 3.594,3.302 3.802,2.479 3.802,2.479 4.052,2.479 true 2.49,0.771 2.646,0.969 0.156,0.198 10 true A 3.406,0.771 3.563,0.969 0.156,0.198 10 true A 4.094,2.406 4.406,2.604 0.313,0.198 10 false *b 0.448,2.146 0.76,2.344 0.313,0.198 10 false *a
*a A - A Cross Section *b Impact Absorption Stroke


·

Impact absorbing structure has been adopted to hood inner panel.

Y191018C02
0,0 0,0 false
V115731

Cutout - -


·

The parts surrounding the cowl top ventilator louver sub-assembly use a crushable structure to improve the rate of energy absorption from the estimated collision direction to reduce the impact to the pedestrian whose head, etc., struck the area. The structure of the cowl top ventilator louver sub-assembly maintains the necessary rigidity while having a lowered deformation strength in order to absorb impact load.

Y191019C02
0.302,1.833 6.115,4.75 5.813,2.917 3.396,3.698 4.073,4.177 4.073,4.177 4.24,4.177 true 1.583,3.25 1.583,2.75 1.583,2.75 1.729,2.75 true 2.365,3.333 2.365,2.25 2.365,2.25 2.51,2.25 true 4.167,2.771 4.167,2.104 4.167,2.104 4.333,2.104 true 1.75,2.698 2.063,2.854 0.313,0.156 10 false *1 2.531,2.198 2.844,2.354 0.313,0.156 10 false *2 4.354,2.042 4.667,2.198 0.313,0.156 10 false *3 1.552,0.677 1.708,0.833 0.156,0.156 10 true A 0.375,1.917 0.688,2.073 0.313,0.156 10 false *a 4.281,4.104 4.594,4.26 0.313,0.156 10 false *b 1.573,1.563 1.729,1.719 0.156,0.156 10 true A
*1 Hood Sub-assembly *2 Cowl Top Ventilator Louver Sub-assembly
*3 Windshield - -
*a A - A Cross Section *b Impact Absorption Stroke