Home › Suspension › TIRE / WHEEL › WHEEL HUB GARNISH
RM3210E _53 Suspension _047546 TIRE / WHEEL _0228899 WHEEL HUB GARNISH A

TIRE / WHEEL  WHEEL HUB GARNISH  REMOVAL  


PROCEDURE

Hide 1.REMOVE WHEEL ASSEMBLY

Hide 42621 2.REMOVE WHEEL CAP

NOTICE:
·

Confirm that the wheel cap is not excessively loose.

·

If the installation of the wheel cap is abnormal, replace the wheel cap with a new one.

·

Be careful not to damage the disc wheel.

·

When removing the wheel cap from the wheel assembly, always remove the wheel assembly from the vehicle and disengage the claws from the backside of the wheel assembly using a tool.



HINT:
·

There are 5 wheel caps per wheel.

·

Perform the same procedure for each of the 5 wheel caps.



a.
C334883N01
0.333,2.01 1.26,2.01 true 0.333,1.677 1.552,1.677 true 1.896,2.188 1.896,2.677 1.896,2.677 2.313,2.677 true 0.208,1.958 0.365,2.156 0.156,0.198 10 false A 0.208,1.615 0.365,1.813 0.156,0.198 10 false B 2.344,2.615 2.5,2.813 0.156,0.198 10 false A

Using a tool such as needle nose pliers, disengage the 2 claws (A) from the backside of the wheel assembly.


b.

Disengage the claw (B) to remove the wheel cap from the wheel assembly.