Home › Suspension › TIRE / WHEEL › WHEEL HUB GARNISH
RM3210E _53 Suspension _047546 TIRE / WHEEL _0228899 WHEEL HUB GARNISH A

TIRE / WHEEL  WHEEL HUB GARNISH  INSTALLATION  


PROCEDURE

Hide 42621 1.INSTALL WHEEL CAP

NOTICE:

Be careful not to damage the disc wheel.


HINT:
·

There are 5 wheel caps per wheel.

·

Perform the same procedure for each of the 5 wheel caps.



a.
C334884C01
0.26,2.031 0.573,2.188 0.313,0.156 10 false *a 1.854,2.042 2.167,2.198 0.313,0.156 10 false *b
*a Component (A)
*b Component (B)


Confirm the following conditions before installing the wheel cap.

NOTICE:

If any abnormalities are found, replace the wheel cap with a new one.


i.

The component (A) and (B) are not loose or missing.


ii.

The claw is not cracked or has deteriorated.



b.
C334883N01
0.333,2.01 1.26,2.01 true 0.333,1.677 1.552,1.677 true 1.896,2.188 1.896,2.677 1.896,2.677 2.313,2.677 true 0.208,1.958 0.365,2.156 0.156,0.198 10 false A 0.208,1.615 0.365,1.813 0.156,0.198 10 false B 2.344,2.615 2.5,2.813 0.156,0.198 10 false A

Engage the claw (B).


c.

Engage the 2 claws (A) to install the wheel cap to the wheel assembly.


d.

Confirm that the wheel cap is securely installed.

NOTICE:
·

Confirm that the wheel cap is not excessively loose.

·

If the installation of the wheel cap is abnormal, replace the wheel cap with a new one.

·

Periodically inspect the wheel cap.




Hide 2.INSPECT AND ADJUST WHEEL BALANCE

Hide 3.INSTALL WHEEL ASSEMBLY