Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER
RM3210E _58 Vehicle Interior _047534 HEATING / AIR CONDITIONING _0230764 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REASSEMBLY  


PROCEDURE

Hide 88474 1.INSTALL COOLER DRYER

a.
E336875C04
2.125,1.938 2.76,1.594 true 2.823,1.51 3.135,1.667 0.313,0.156 10 false *a
*a Modulator


Using pliers, install a new cooler dryer to the modulator.


b.
E330613

Sufficiently apply compressor oil to the 3 O-rings and fitting surfaces of a new cap.

Compressor Oil:

ND-OIL 11 or equivalent


NOTICE:
·

Keep the O-rings and O-ring fitting surfaces free from dirt or foreign matter.

·

Do not use any compressor oil other than ND-OIL 11 or equivalent.




c.
E336874C04
1.583,1.542 2.021,1.917 true 1.417,1.448 1.635,1.625 0.219,0.177 10 true *a
*a Modulator


Using a 14 mm straight hexagon, install the cap to the modulator.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)