81220
1.INSPECT FOG LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Fog Light Assembly LH) |
Apply auxiliary battery voltage to the fog light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 4 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Fog light comes on |
| Auxiliary battery positive (+) → Terminal 2 (DRL)
Auxiliary battery negative (-) → Terminal 3 (DRLC) and Terminal 1 (E) |
Daytime running light comes on |
If the result is not as specified, replace the fog light assembly LH.
81210A
2.INSPECT FOG LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Fog Light Assembly RH) |
Apply auxiliary battery voltage to the fog light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 4 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Fog light comes on |
| Auxiliary battery positive (+) → Terminal 2 (DRL)
Auxiliary battery negative (-) → Terminal 3 (DRLC) and Terminal 1 (E) |
Daytime running light comes on |
If the result is not as specified, replace the fog light assembly RH.