Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81510C
1.REMOVE FRONT TURN SIGNAL LIGHT BULB
|
Remove in this Direction |
for RH Side:
Remove the clip and washer pipe as shown in the illustration.
|
Remove in this Direction |
Turn the headlight cord with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.
Remove the front turn signal light bulb from the headlight cord.
81510C
2.INSTALL FRONT TURN SIGNAL LIGHT BULB
Install a new front turn signal light bulb to the headlight cord.
|
Install in this Direction |
Turn the headlight cord with the front turn signal light bulb as shown in the illustration to connect them as a unit.
for RH Side:
|
Install in this Direction |
Install the washer pipe with the clip as shown in the illustration.