Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY
RM3210E _59 Vehicle Exterior _047533 LIGHTING (EXT) _0231472 SIDE TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81740 1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.
E221729C07
0.176,0.088 0.388,0.275 0.212,0.188 10 *a
*a Component without harness connected
(Side Turn Signal Light Assembly LH)


Apply auxiliary battery voltage to the side turn signal light LH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1
Side turn signal light LH comes on


If the result is not as specified, replace the side turn signal light assembly LH.


Hide 81730 2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

a.
E221729C07
0.176,0.088 0.388,0.275 0.212,0.188 10 *a
*a Component without harness connected
(Side Turn Signal Light Assembly RH)


Apply auxiliary battery voltage to the side turn signal light RH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1
Side turn signal light RH comes on


If the result is not as specified, replace the side turn signal light assembly RH.