Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM3210E _59 Vehicle Exterior _047533 LIGHTING (EXT) _0231473 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81561D 1.INSTALL REAR COMBINATION LIGHT LENS AND BODY

Hide 81565 2.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E337100

Connect the connector.


b.

Engage the clamp to install the rear combination light socket and wire sub-assembly.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.


b.
E337060C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to connect them as a unit.


Hide 81550N 4.INSTALL BACK-UP LIGHT BULB

a.

Install the back-up light bulb to the rear combination light socket and wire sub-assembly.


b.
E337056C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire sub-assembly with the back-up light bulb as shown in the illustration to connect them as a unit.