Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81591B
1.INSTALL REAR LIGHT LENS AND BODY
81455
2.INSTALL REAR FOG LIGHT LED (w/ Rear Fog Light)
|
Install in this Direction |
Turn the rear fog light LED as shown in the illustration to temporarily install it.
Using a T20 "TORX" socket wrench, install the rear fog light LED with the screw.
81536A
3.INSTALL REAR COMBINATION LIGHT LED
|
Install in this Direction |
Turn the rear combination light LED as shown in the illustration to temporarily install it.
Using a T20 "TORX" socket wrench, install the rear combination light LED with the screw.