81590A
1.INSPECT REAR LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Rear Light Assembly LH (Taillight)) |
Apply auxiliary battery voltage to the rear light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Taillight comes on |
If the result is not as specified, replace the rear combination light lens and body LH.
| *a | Component without harness connected
(Rear Light Assembly LH (Stop Light)) |
Apply auxiliary battery voltage to the rear light assembly LH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Stop light comes on |
If the result is not as specified, replace the rear combination light LED.
| *a | Component without harness connected
(Rear Light Assembly LH (Rear Fog Light)) |
Apply auxiliary battery voltage to the rear light assembly LH and check that the light comes on. (w/ Rear Fog Light)
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Rear fog light comes on |
If the result is not as specified, replace the rear fog light LED.
81580D
2.INSPECT REAR LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Rear Light Assembly RH (Taillight)) |
Apply auxiliary battery voltage to the rear light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Taillight comes on |
If the result is not as specified, replace the rear combination light lens and body RH.
| *a | Component without harness connected
(Rear Light Assembly RH (Stop Light)) |
Apply auxiliary battery voltage to the rear light assembly RH and check that the light comes on.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Stop light comes on |
If the result is not as specified, replace the rear combination light LED.
| *a | Component without harness connected
(Rear Light Assembly RH (Rear Fog Light)) |
Apply auxiliary battery voltage to the rear light assembly RH and check that the light comes on. (w/ Rear Fog Light)
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E) |
Rear fog light comes on |
If the result is not as specified, replace the rear fog light LED.