Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM3210E _59 Vehicle Exterior _047533 LIGHTING (EXT) _0231478 HIGH MOUNTED STOP LIGHT ASSEMBLY G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81006 1.INSPECT CENTER STOP LIGHT ASSEMBLY

a.
E125017C50
1.99,1.396 2.281,1.896 false 1.427,1.406 1.115,1.896 false 0.271,0.188 0.583,0.344 0.313,0.156 10 false *a 0.927,1.917 1.375,2.135 0.448,0.219 10 false HMSL 2.281,1.906 2.625,2.125 0.344,0.219 10 false GND
*a Component without harness connected
(Center Stop Light Set)


Apply auxiliary battery voltage to the center stop light set and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (HMSL)
Auxiliary battery negative (-) → Terminal 1 (GND)
Center stop light comes on


If the result is not as specified, replace the center stop light set.