Home › Vehicle Exterior › LIGHTING (EXT) › HAZARD WARNING SWITCH
RM3210E _59 Vehicle Exterior _047533 LIGHTING (EXT) _0231480 HAZARD WARNING SWITCH A

LIGHTING (EXT)  HAZARD WARNING SWITCH  INSTALLATION  


PROCEDURE

Hide 84330 1.INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

a.

Engage the 2 claws to install the hazard warning signal switch assembly.


b.

Connect the connector.


Hide 55670A 2.INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Engage the 8 claws to install the center instrument panel register assembly.


b.

Engage the clamp.


Hide 55405B 3.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 55435A 4.INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)