Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81134
1.INSTALL HEADLIGHT GASKET
Install a new headlight gasket.
81056
2.INSTALL NO. 1 HEADLIGHT ECU SUB-ASSEMBLY
Connect the connector.
Install the connector cover to the No. 1 headlight ECU sub-assembly.
Install the No. 1 headlight ECU sub-assembly with the 3 screws.
If the No. 1 headlight ECU sub-assembly has been struck or dropped, replace it with a new one.
3.INSTALL HEADLIGHT ASSEMBLY