Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM
RM3210E _51 Engine / Hybrid System _047527 CRUISE CONTROL _0232278 ROAD SIGN ASSIST SYSTEM D

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE ROAD SIGN ASSIST SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the multi-information display

i.

Turn the power switch on (IG).


ii.

Enter the following menu: Settings Tab.


iii.

Select the setting by referring to the table below.

Settings Tab
Display Default Description Setting Relevant ECU
RSA ON/OFF ON System ON/OFF setting ON or OFF Forward recognition camera


iv.

Enter the following menus: Settings Tab / Settings / Road Sign Assist Setup.


v.

Select the setting by referring to the table below.

Road Sign Assist Setup
Display Default Description Setting Relevant ECU

*1: When the unit of speed selected for the meter is changed, the displayed unit of speed also changes.

Excess Speed Only Visual Excess speed notification method setting No Notification, Only Visual or Visual and Audible Forward recognition camera
Notification Level 2 km/h (1 MPH) Excess speed notification level setting*1 10 km/h (5 MPH), 5 km/h (3 MPH), 2 km/h (1 MPH) Forward recognition camera
Other Notifications Only Visual No overtaking notification method setting No Notification, Only Visual or Visual & Audible Forward recognition camera