Home › Engine / Hybrid System › 2ZR-FXE COOLING › COOLING FAN MOTOR
RM3210E _51 Engine / Hybrid System _047499 2ZR-FXE COOLING _0233437 COOLING FAN MOTOR G

2ZR-FXE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
A345225

To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the cooling fan system.


PROCEDURE

Hide 16363G 1.INSPECT COOLING FAN MOTOR LH

CAUTION:

To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the cooling fan system.


a.

Disconnect the cooling fan motor LH connector.


b.
A367924C02
1.938,1.417 2.323,1.417 false 1.073,1.427 1.458,1.427 false 0.083,0.073 0.396,0.229 0.313,0.156 10 false *a 2.354,1.333 2.813,1.531 0.458,0.198 10 false (-) 0.865,1.333 1.323,1.531 0.458,0.198 10 false (+)
*a Component without harness connected
(Cooling Fan Motor LH)


Check that the cooling fan motor LH operates smoothly when the auxiliary battery is connected to the cooling fan motor LH connector.


c.

Measure the current while the cooling fan motor LH is operating.

Standard Current:
Motor Type Condition Specified Condition
Cooling Fan Motor 120 W Type Auxiliary battery voltage applied at 20°C (68°F) 7.4 to 10.9 A
Cooling Fan Motor 160 W Type 10.3 to 16.3 A


If the result is not as specified, replace the cooling fan motor LH.


d.

Connect the cooling fan motor LH connector.


Hide 16363F 2.INSPECT COOLING FAN MOTOR RH

CAUTION:

To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the cooling fan system.


a.

Disconnect the cooling fan motor RH connector.


b.
A255569C13
1.906,1.406 2.531,1.406 false 0.844,1.406 1.469,1.406 false 0.115,0.073 0.427,0.229 0.313,0.156 10 false *a 2.594,1.302 3.052,1.5 0.458,0.198 10 false (-) 0.625,1.313 1.083,1.51 0.458,0.198 10 false (+)
*a Component without harness connected
(Cooling Fan Motor RH)


Check that the cooling fan motor RH operates smoothly when the auxiliary battery is connected to the cooling fan motor RH connector.


c.

Measure the current while the cooling fan motor RH is operating.

Standard Current:
Motor Type Condition Specified Condition
Cooling Fan Motor 120 W Type Auxiliary battery voltage applied at 20°C (68°F) 7.4 to 10.9 A
Cooling Fan Motor 160 W Type 10.3 to 16.3 A


If the result is not as specified, replace the cooling fan motor RH.


d.

Connect the cooling fan motor RH connector.