Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM3210E _59 Vehicle Exterior _047514 WIPER / WASHER _0233572 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

a.

for LH Side:

i.
E337253C01
1.479,3.156 1.396,2.885 false 1.438,3.167 1.635,3.354 0.198,0.188 10 true *a 0.865,2.688 1.021,2.885 0.156,0.198 10 true A 0.875,2.927 1.031,3.125 0.156,0.198 10 true A
*a Alignment Mark


Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 7.5 mm (0.295 in.)


OK:

The front wiper stops at the position shown in the illustration.




b.

for RH Side:

i.
E337251C01
0.75,1.073 0.729,0.74 false 0.698,1.083 0.885,1.26 0.188,0.177 10 true *a 0.26,0.604 0.417,0.802 0.156,0.198 10 false A 0.333,0.375 0.49,0.573 0.156,0.198 10 false A
*a Alignment Mark


Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 7.5 mm (0.295 in.)


OK:

The front wiper stops at the position shown in the illustration.