Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM3210E _59 Vehicle Exterior _047514 WIPER / WASHER _0233634 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
E337158C02
0.698,0.875 0.896,0.458 false 0.604,0.885 0.917,1.042 0.313,0.156 10 false *a 0.781,0.052 0.938,0.25 0.156,0.198 10 false A 0.906,0.052 1.063,0.25 0.156,0.198 10 false A
*a Alignment Mark


Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.

Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10.0 mm (0.394 in.)


OK:

The rear wiper stops at the position shown in the illustration.