Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0234839 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 71511S 1.INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD (FRONT PASSENGER SEAT))

a.
B202362C01
1.521,1.188 1.938,1.458 0.417,0.271 0.135,0.063 0.531,0.427 0.396,0.365 10 *a 1.677,1.25 1.979,1.542 0.302,0.292 10 B
*a Component without harness connected
(Occupant Detection Sensor (Separate Type Front Seat Cushion Pad (Front Passenger Seat)))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-1 - B-3 Front passenger side seat occupied Below 100 Ω
B-1 - B-3 Front passenger side seat not occupied 1 MΩ or higher


If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad (front passenger seat)).