Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT BULB
RM3210E _58 Vehicle Interior _047531 LIGHTING (INT) _0236237 VANITY LIGHT BULB A

LIGHTING (INT)  VANITY LIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81340 1.SEPARATE VANITY LIGHT ASSEMBLY

a.
E336929

Using a moulding remover, disengage the claw to separate the vanity light assembly.


Hide 81340B 2.REMOVE VANITY LIGHT BULB

a.
E336935C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the vanity light bulb from the bulb holder as shown in the illustration.


Hide 81340B 3.INSTALL VANITY LIGHT BULB

a.
E336936C01
0,0 0,0 false
V113147

Install in this Direction


Install the vanity light bulb to the bulb holder as shown in the illustration.


Hide 81340 4.INSTALL VANITY LIGHT ASSEMBLY

a.
E336934

Engage the claw to install the vanity light assembly.