Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT
RM3210E _58 Vehicle Interior _047531 LIGHTING (INT) _0236240 ROOM LIGHT A

LIGHTING (INT)  ROOM LIGHT  REMOVAL  


PROCEDURE

Hide 81240 1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY

a.
E336950C01
2.313,0.854 2.604,1.115 true 2.625,1.073 2.938,1.271 0.313,0.198 10 true *a
*a Protective Tape
V100136

Front


Using a screwdriver, disengage the 4 claws to remove the No. 1 room light lens.

HINT:

Tape the screwdriver tip before use.



b.
E336951C01
2.344,0.885 2.688,0.948 true 2.708,0.906 3.021,1.104 0.313,0.198 10 true *a
*a Protective Tape
V100136

Front
V113147

Remove in this Direction


Using a screwdriver, disengage the 4 claws as shown in the illustration to separate the No. 1 room light housing.

HINT:

Tape the screwdriver tip before use.



c.
E336952C01
1.667,1.167 2.385,1.74 true 2.417,1.688 2.729,1.844 0.313,0.156 10 true *1
*1 Room Light Switch Base


Disengage the clamp.


d.

Using a screwdriver, disengage the 4 claws to disconnect the room light switch base from the No. 1 room light housing.


Hide 81240B 2.REMOVE NO. 1 ROOM LIGHT BULB

a.

Remove the No. 1 room light bulb from the room light switch base.