Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT BULB
RM3210E _58 Vehicle Interior _047531 LIGHTING (INT) _0236241 ROOM LIGHT BULB A

LIGHTING (INT)  ROOM LIGHT BULB  REPLACEMENT  


PROCEDURE

Hide 81240B 1.REMOVE NO. 1 ROOM LIGHT BULB

a.
E336950C01
2.313,0.854 2.604,1.115 true 2.625,1.073 2.938,1.271 0.313,0.198 10 true *a
*a Protective Tape
V100136

Front


Using a screwdriver, disengage the 4 claws to remove the No. 1 room light lens.

HINT:

Tape the screwdriver tip before use.



b.
E336956C01
0,0 0,0 false
V100136

Front
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull back the tab and remove the No. 1 room light bulb as indicated by the arrows, in the order shown in the illustration.


Hide 81240B 2.INSTALL NO. 1 ROOM LIGHT BULB

a.
E336957C01
0,0 0,0 false
V100136

Front
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Pull back the tab and install the No. 1 room light bulb as indicated by the arrows, in the order shown in the illustration.


b.
E336955C01
0,0 0,0 false
V100136

Front


Engage the 4 claws to install the No. 1 room light lens.