81330
1.INSPECT NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
| *a | Component without harness connected
(No. 1 Luggage Compartment Light Assembly) |
Inspect the luggage compartment room light.
Apply auxiliary battery voltage to each terminal of No. 1 luggage compartment light assembly connector and check the operation of the luggage compartment room light.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (L) |
No. 1 luggage compartment light switch on | Luggage compartment room light comes on |
If the result is not as specified, replace the bulb or No. 1 luggage compartment light assembly.