Home › Vehicle Interior › LIGHTING (INT) › GLOVE BOX LIGHT
RM3210E _58 Vehicle Interior _047531 LIGHTING (INT) _0236246 GLOVE BOX LIGHT G

LIGHTING (INT)  GLOVE BOX LIGHT  INSPECTION  


PROCEDURE

Hide 81260 1.INSPECT GLOVE BOX LIGHT ASSEMBLY

a.
E262975C02
0.135,0.146 0.448,0.344 0.313,0.198 10 *a
*a Component without harness connected
(Glove Box Light Assembly)


Inspect the glove box light.

i.

Apply battery voltage to each terminal of glove box light assembly connector and check the operation of the glove box light.

Result:
Connection Specified Condition
Battery positive (+) → 2
Battery negative (-) → 1
Glove box light comes on


If the result is not as specified, replace the glove box light assembly.