81080L
1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly LH) |
Apply auxiliary battery voltage to the connector and check that the No. 1 interior illumination light LH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (L) |
Always | No. 1 interior illumination light LH comes on |
If the result is not as specified, replace the No. 1 interior illumination light assembly LH.
81080H
2.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly RH) |
Apply auxiliary battery voltage to the connector and check that the No. 1 interior illumination light RH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (L) |
Always | No. 1 interior illumination light RH comes on |
If the result is not as specified, replace the No. 1 interior illumination light assembly RH.