58903A
1.REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
85530D
2.REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the No. 2 power outlet socket assembly as shown in the illustration.
85535E
3.REMOVE NO. 2 POWER OUTLET SOCKET COVER
|
Remove in this Direction |
Disengage the 2 claws and remove the No. 2 power outlet socket cover as shown in the illustration.