Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › INTRUSION SENSOR
RM3210E _58 Vehicle Interior _047507 THEFT DETERRENT / KEYLESS ENTRY _0236366 INTRUSION SENSOR A

THEFT DETERRENT / KEYLESS ENTRY  INTRUSION SENSOR  REMOVAL  


PROCEDURE

Hide 89732A 1.REMOVE THEFT WARNING ULTRASONIC SENSOR

a.
B434462C01
0,0 0,0 false
V113146

Insert Moulding Remover Here


Using a moulding remover, disengage the 4 claws as shown in the illustration.


b.
B434463

Disconnect the connector.


c.

Disengage the 2 clamps to remove the theft warning ultrasonic sensor.