Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM3210E _58 Vehicle Interior _047509 METER / GAUGE / DISPLAY _0236932 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0129  Lost Communication with Brake System Control Module  U0131  Lost Communication with Power Steering Control Module  U0142  Lost Communication with Body Control Module "B"  U0151  Lost Communication with Restraints Control Module  U0163  Lost Communication with Navigation Control Module  U0182  Lost Communication with Lighting Control Module Front  U023A  Lost Communication with Front Camera Module  U0293  Lost Communication with Hybrid Vehicle Control System  U1104  Lost Communication with Driving Support ECU  


DESCRIPTION

The combination meter assembly (meter circuit plate) communicates with the ECM, hybrid vehicle control ECU, skid control ECU (brake booster with master cylinder assembly), power steering ECU assembly, main body ECU (multiplex network body ECU), airbag ECU assembly, radio and display receiver assembly*1, navigation receiver assembly*2, headlight ECU sub-assembly LH, forward recognition camera*3 and driving support ECU assembly*4 via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
U0100 Lost Communication with ECM / PCM "A" When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with ECM or hybrid vehicle control ECU continues for 3 seconds or more


·

ECM

·

Hybrid vehicle control ECU

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored -
U0129 Lost Communication with Brake System Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with skid control ECU (brake booster with master cylinder assembly) continues for 2 seconds or more


·

Skid control ECU (Brake booster with master cylinder assembly)

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored -
U0131 Lost Communication with Power Steering Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with power steering ECU assembly continues for 3 seconds or more


·

Power steering ECU assembly

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored -
U0142 Lost Communication with Body Control Module "B" When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with main body ECU (multiplex network body ECU) continues for 3 seconds or more


·

Main body ECU (Multiplex network body ECU)

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored -
U0151 Lost Communication with Restraints Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with airbag ECU assembly continues for 10 seconds or more


·

Airbag ECU assembly

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored -
U0163 Lost Communication with Navigation Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with radio and display receiver assembly*1 or navigation receiver assembly*2 continues for 3 seconds or more


·

Radio and display receiver assembly*1

·

Navigation receiver assembly*2

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored for Radio and Display Type or Navigation Receiver Type
U0182 Lost Communication with Lighting Control Module Front When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with headlight ECU sub-assembly LH continues for 10 seconds or more


·

Headlight ECU sub-assembly LH

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored -
U023A Lost Communication with Front Camera Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with forward recognition camera continues for 10 seconds or more


·

Forward recognition camera

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored w/ Lane Departure Alert System
U0293 Lost Communication with Hybrid Vehicle Control System When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with hybrid vehicle control ECU continues for 10 seconds or more


·

Hybrid vehicle control ECU

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored -
U1104 Lost Communication with Driving Support ECU When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with driving support ECU assembly continues for 10 seconds or more


·

Driving support ECU assembly

·

CAN communication system

·

Combination meter assembly (Meter circuit plate)


DTC stored w/ Pre-crash Safety System

*1: for Radio and Display Type

*2: for Navigation Receiver Type

*3: w/ Lane Departure Alert System

*4: w/ Pre-crash Safety System


PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Check if CAN communication DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM


Result:
Result Proceed to
CAN communication DTCs are output. A
CAN communication DTCs are not output. B



A

B