Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM3210E _54 Brake _047520 BRAKE (FRONT) _0237141 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  DISASSEMBLY  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C344516C02
1.823,1.198 2.49,1.656 2.49,1.656 2.604,1.656 false 2.646,1.594 2.958,1.75 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the set ring from the front disc brake cylinder.


b.
C344517C02
1.802,1.188 2.344,1.583 2.344,1.583 2.427,1.583 false 2.469,1.521 2.781,1.677 0.313,0.156 10 false *a
*a Protective Tape


Remove the cylinder boot from the front disc brake cylinder.

NOTICE:

Be careful not to damage the front disc brake cylinder.



Hide 47731 2.REMOVE FRONT DISC BRAKE PISTON

a.
C344518C01
0.24,1.719 0.344,1.719 0.344,1.719 0.875,1.385 false 0.083,1.635 0.396,1.792 0.313,0.156 10 false *a
*a Cloth


Place a piece of cloth between the front disc brake piston and front disc brake cylinder.


b.

Apply compressed air to remove the front disc brake piston from the front disc brake cylinder.

CAUTION:
C344519

·

Do not hold the front disc brake cylinder with any part of your hand between the front disc brake cylinder and front disc brake piston.

·

Do not place any part of your hand in front of the front disc brake piston when using compressed air as a severe injury may result.



NOTICE:

Do not allow any brake fluid to spatter.



Hide 3.REMOVE PISTON SEAL

a.
C344520C02
1.677,1.177 2.198,1.771 2.198,1.771 2.313,1.771 true 2.354,1.719 2.667,1.875 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the front disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the front disc brake cylinder.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG