Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM3210E _53 Suspension _047519 FRONT SUSPENSION _0237145 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

CAUTION:
C320205

·

Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

·

Always wear safety glasses.



HINT:

The gas is colorless, odorless and non-poisonous.


a.

except Rough Road Area Specification Vehicles

i.
C351019N01
0.25,0.323 0.406,0.521 0.156,0.198 10 false A 1.313,0.323 1.469,0.521 0.156,0.198 10 false B 1.917,0.323 2.073,0.521 0.156,0.198 10 false C 2.594,0.323 2.75,0.521 0.156,0.198 10 false D

Place the front shock absorber horizontally with the piston rod extended, and using a hacksaw, make a hole between (A) and (B), and between (C) and (D) shown in the illustration to discharge the gas inside.



b.

for Rough Road Area Specification Vehicles

i.
C344918N01
1.917,0.323 2.073,0.521 0.156,0.198 10 false A 2.604,0.323 2.76,0.521 0.156,0.198 10 false B

Place the front shock absorber horizontally with the piston rod extended, and using a hacksaw, make a hole between (A) and (B) shown in the illustration to discharge the gas inside.