Wear protective gloves. Sharp areas on the parts may injure your hands.
72868B
1.REMOVE CENTER ARMREST HINGE COVER (for RH Side)
|
Remove in this Direction |
Disengage the claw and remove the center armrest hinge cover as shown in the illustration.
72830
2.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)
Remove the bolt and washer.
Disengage the guide as shown in the illustration.
|
Remove in this Direction |
Disengage the pin to remove the rear seat center armrest assembly as shown in the illustration.
|
Remove in this Direction |
Remove the bush as shown in the illustration.
73178A
3.REMOVE SEAT BELT ANCHOR COVER CAP (for RH Side)
Disengage the 2 claws, 2 guides and separate the rear seat shoulder belt cover with seat belt anchor cover cap.
|
Remove in this Direction |
Disengage the 2 guides to remove the seat belt anchor cover cap as shown in the illustration.
73373
4.REMOVE REAR SEAT SHOULDER BELT COVER (for RH Side)
Remove the rear seat shoulder belt cover.
72679
5.REMOVE REAR SEATBACK LOCK CONTROL BEZEL (for RH Side)
Disengage the 4 claws to remove the rear seatback lock control bezel.
71701C
6.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)
Disengage the hook.
| *a | Fastener |
Open the 2 fasteners as shown in the illustration.
Disengage the 9 claws.
Disengage the 2 guides to remove the rear seatback board sub-assembly RH.
7.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
Disengage the hook.
|
Remove in this Direction |
for Center:
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
Remove in this Direction |
for RH Side:
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
for RH Side:
|
Remove in this Direction |
for Type A:
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
Remove in this Direction |
for Type B:
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
Remove in this Direction |
Pass the rear center seat outer belt assembly through the separate type rear seatback cover with pad and remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH as shown in the illustration.
71077S
8.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
Using a screwdriver, disengage the 8 claws and remove the separate type rear seatback cover from the separate type rear seatback pad RH as shown in the illustration.
| *a | Screwdriver | - | - |
73350C
9.REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)
72630C
10.REMOVE REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)
Remove the 2 bolts and rear seatback lock assembly RH.
72679
11.REMOVE REAR SEATBACK LOCK CONTROL BEZEL (for LH Side)
Disengage the 4 claws to remove the rear seatback lock control bezel.
71702C
12.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)
Disengage the hook.
| *a | Fastener |
Open the 2 fasteners as shown in the illustration.
Disengage the 5 claws.
Disengage the 2 guides to remove the rear seatback board sub-assembly LH.
13.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
|
Remove in this Direction |
for Type A:
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
Remove in this Direction |
for Type B:
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
Remove in this Direction |
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH as shown in the illustration.
71078S
14.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
Using a screwdriver, disengage the 8 claws and remove the separate type rear seatback cover from the separate type rear seatback pad LH as shown in the illustration.
| *a | Screwdriver | - | - |
72640A
15.REMOVE REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)
Remove the 2 bolts and rear seatback lock assembly LH.
73731B
16.REMOVE NO. 1 CHILD RESTRAINT SEAT COVER (w/ Cover)
|
Remove in this Direction |
Disengage the 2 claws and 2 guides to remove the No. 1 child restraint seat cover as shown in the illustration.
Use the same procedure for all No. 1 child restraint seat covers.
73731C
17.REMOVE NO. 2 CHILD RESTRAINT SEAT COVER (w/ Cover)
|
Remove in this Direction |
Disengage the 4 claws to remove the No. 2 child restraint seat cover as shown in the illustration.
Use the same procedure for all No. 2 child restraint seat covers.
73735
18.REMOVE CHILD RESTRAINT SEAT GUIDE CUP (w/ Cover)
|
Remove in this Direction |
Remove the child restraint seat guide cup as shown in the illustration.
Use the same procedure for all child restraint seat guide cups.
71075B
19.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
| *a | Fastener |
Disengage the hook and 2 fasteners.
Disengage the 19 hooks.
Using a screwdriver, disengage the 18 claws to remove the bench type rear seat cushion cover from the rear seat cushion pad as shown in the illustration.
| *a | Screwdriver | - | - |