Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › INVERTER BATTERY
RM3210E _51 Engine / Hybrid System _047524 HYBRID / BATTERY CONTROL _0237691 INVERTER BATTERY A

HYBRID / BATTERY CONTROL  INVERTER BATTERY  INSTALLATION  


PROCEDURE

Hide 8598B 1.INSTALL INVERTER BATTERY

a.

Temporarily install the inverter battery with the 2 bolts.


b.
A378148N02
1.667,1.896 1.844,2.104 0.177,0.208 10 true 1 2.458,1.406 2.635,1.615 0.177,0.208 10 true 2

Fully tighten the 2 bolts in the order shown in the illustration.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


c.

Engage the 2 clamps.


d.

Connect the inverter battery connector.


Hide 58910C 2.INSTALL REAR CONSOLE BOX ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION