Home › Vehicle Exterior › VEHICLE PROXIMITY NOTIFICATION SYSTEM › VEHICLE APPROACHING SPEAKER
RM3210E _59 Vehicle Exterior _047541 VEHICLE PROXIMITY NOTIFICATION SYSTEM _0237697 VEHICLE APPROACHING SPEAKER G

VEHICLE PROXIMITY NOTIFICATION SYSTEM  VEHICLE APPROACHING SPEAKER  INSPECTION  


PROCEDURE

Hide 86570 1.INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY

a.
E301984C02
1.969,1.302 2.583,1.813 false 1.469,1.333 0.885,1.76 false 0.177,0.188 0.49,0.344 0.313,0.156 10 false *a 0.74,1.823 1.052,1.979 0.313,0.156 10 false - 2.635,1.823 2.948,1.979 0.313,0.156 10 false +
*a Component without harness connected
(Vehicle Approaching Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (+) - 2 (-) Always 6.4 to 9.6 Ω


HINT:

Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly. If the result is not as specified, replace the vehicle approaching speaker assembly.