Home › Vehicle Exterior › VEHICLE PROXIMITY NOTIFICATION SYSTEM › VEHICLE PROXIMITY NOTIFICATION SYSTEM
RM3210E _59 Vehicle Exterior _047541 VEHICLE PROXIMITY NOTIFICATION SYSTEM _0237698 VEHICLE PROXIMITY NOTIFICATION SYSTEM W

VEHICLE PROXIMITY NOTIFICATION SYSTEM  VEHICLE PROXIMITY NOTIFICATION SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE VEHICLE PROXIMITY NOTIFICATION SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS.

i.

Turn the power switch off.


ii.

Connect the GTS to the DLC3.


iii.

Turn the power switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Utility / Customize Setting / Others.


vi.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
Proximity Sound Volume Adjustment Function that sets the warning sound volume in 3 levels Standard 010:Standard,011:Standard +1,100:Standard +2 Hybrid Vehicle Control ECU
Proximity Sound Level Increase (Vehicle Starting) Function that amplifies the warning sound when the vehicle starts off ON 0:OFF,1:ON Hybrid Vehicle Control ECU
Proximity Sound Control (Vehicle Stationary) Function that sets the warning sound when the vehicle is stopped OFF 0:OFF,1:ON Hybrid Vehicle Control ECU
50006 98