Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM
RM3210E _58 Vehicle Interior _047507 THEFT DETERRENT / KEYLESS ENTRY _0238440 THEFT DETERRENT SYSTEM W

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE THEFT DETERRENT SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Security or Wireless Door Lock.


v.

Select the setting by referring to the table below.

Security
Tester Display Description Default Setting ECU
Intrusion Win Opened This function makes it possible to use the intrusion sensor when the windows are open.*1 OFF 00:OFF,01:ON Main body ECU (Multiplex network body ECU)
Security control with mechanism key This function makes it possible to cancel the security alarm with the mechanical key.*2 OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 3

*1: w/ Intrusion Sensor

*2: Vehicles displaying the Item "Security control with mechanism key" on the GTS


Wireless Door Lock
Tester Display Description Default Setting ECU
Panic Function This function makes it possible to operate the theft deterrent system by continuously pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds* ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 1

*: w/ Panic Switch