Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM
RM3210E _58 Vehicle Interior _047529 PRE-CRASH SAFETY _0239266 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  OPERATION CHECK  


CHECK PRE-CRASH SAFETY SYSTEM SETTING


a.

Turn the power switch on (IG).


b.

Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-crash safety system turns on.

HINT:

When the power switch is turned on (IG), the PCS will turn on. This can be changed through a customize setting using the GTS.



c.
B434171C01
0.469,0.167 0.781,0.323 0.313,0.156 10 false *a
*a PCS Warning Light


Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.



CHECK PRE-CRASH SAFETY SYSTEM SENSITIVITY SETTING


a.

Turn the power switch on (IG).


b.

Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly.

HINT:
·

Check that the sensitivity setting displayed on the multi-information display changes between "Far", "Mid", and "Near" accordingly.

·

The default setting is "Mid".