FAIL-SAFE FUNCTION
When a malfunction occurs in the pre-crash safety system, a message will be displayed on the multi-information display and the pre-crash safety system will be disabled depending on the malfunction.
| Warning Message | Cause | DTC No. | Conditions to Return to Normal |
|---|---|---|---|
| "Pre-Crash Safety Malfunction Visit Your Dealer" is displayed | Pre-crash safety system malfunction | C1A01 | After system returns to normal, power switch is turned off and then on (IG) |
| C1A02 | System returns to normal | ||
| C1A0A | System returns to normal | ||
| C1A10 | After system returns to normal, power switch is turned off and then on (IG) | ||
| C1A11 | After system returns to normal, power switch is turned off and then on (IG) | ||
| C1A14 | System returns to normal | ||
| C1A46 | After system returns to normal, power switch is turned off and then on (IG) | ||
| C1A47 | After system returns to normal, power switch is turned off and then on (IG) | ||
| C1A4A | System returns to normal | ||
| C1A4B | System returns to normal | ||
| C1A50 | System returns to normal | ||
| C1A63 | System returns to normal | ||
| C1A64 | After system returns to normal, power switch is turned off and then on (IG) | ||
| C1AA0 | After system returns to normal, power switch is turned off and then on (IG) | ||
| C1AA9 | After system returns to normal, power switch is turned off and then on (IG) | ||
| U0125 | System returns to normal | ||
| U0126 | System returns to normal | ||
| U0129 | System returns to normal | ||
| U0235 | System returns to normal | ||
| U023A | System returns to normal | ||
| U0293 | System returns to normal | ||
| U1002 | System returns to normal | ||
| U1104 | System returns to normal | ||
| "Pre-Crash Safety Unavailable" | ·
Millimeter wave radar sensor assembly misaligned ·
Millimeter wave radar sensor assembly temperature malfunction ·
Millimeter wave radar sensor assembly low voltage malfunction |
·
Millimeter wave radar sensor beam axis adjustment is completed and beam axis learning is completed ·
Millimeter wave radar sensor temperature returns to normal ·
Millimeter wave radar sensor voltage returns to normal |
|
| "Pre-Crash Safety Unavailable Clean Sensor" | Foreign matter attached to millimeter wave radar sensor assembly | Millimeter wave radar sensor assembly is cleaned | |
| "Forward Camera System Unavailable" | Forward recognition camera temporarily malfunctioning
·
Abnormal forward recognition camera voltage ·
Forward recognition camera temperature outside of operational range ·
Other forward recognition camera malfunction |
·
Forward recognition camera temperature returns to normal ·
Forward recognition camera voltage returns to normal ·
Forward recognition camera returns to normal |
|
| "Forward Camera System Unavailable Clean Windshield" | Foreign matter attached to forward recognition camera or area of windshield in front of forward recognition camera | Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned | |