Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY SYSTEM
RM3210E _58 Vehicle Interior _047509 METER / GAUGE / DISPLAY _0241557 HEADUP DISPLAY SYSTEM U

METER / GAUGE / DISPLAY  HEADUP DISPLAY SYSTEM  TERMINALS OF ECU  


COMBINATION METER MIRROR ECU


E332448N04
3.375,0.167 3.792,0.417 0.417,0.25 3.5,0.208 3.813,0.406 0.313,0.198 10 false G7

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G7-1 (B) - Body ground G - Body ground Auxiliary battery Power switch off 11 to 14 V
G7-2 (IG) - Body ground V - Body ground Power switch signal Power switch off Below 1 V
Power switch on (IG) 11 to 14 V
G7-4 (CANH) - Body ground P - Body ground CAN communication line - -
G7-5 (CANL) - Body ground W - Body ground CAN communication line - -
G7-6 (ES) - Body ground BR - Body ground Ground Always Below 1 Ω
G7-7 (LCL+) - Body ground R - Body ground Local bus communication line - -
G7-8 (LCL-) - Body ground V - Body ground Local bus communication line - -
G7-11 (E) - Body ground SB - Body ground Ground Always Below 1 Ω
G7-16 (SW1) - G7-6 (ES) BE - BR Headup display switch (No. 2 combination switch assembly) signal Power switch on (IG), headup display switch (No. 2 combination switch assembly) not pushed 4 to 6 V
Power switch on (IG), headup display switch (No. 2 combination switch assembly) pushed Below 1 V