Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY SYSTEM
RM3210E _58 Vehicle Interior _047509 METER / GAUGE / DISPLAY _0241557 HEADUP DISPLAY SYSTEM D

METER / GAUGE / DISPLAY  HEADUP DISPLAY SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

Whenever a meter DTC is detected, the combination meter mirror ECU stores the current vehicle state as freeze frame data.



CHECK FREEZE FRAME DATA


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Head Up Display / Trouble Codes.


e.

According to the GTS display, select a DTC that stored freeze frame data.


f.

Read the freeze frame data recorded when the DTC was stored.

Head Up Display
Tester Display Condition Displayed Item
B150A Lost Communication with HMI-LAN
·

Trip

·

Elapsed time after turning the power switch on (IG)


U0100 Lost Communication with ECM / PCM "A"
U0142 Lost Communication with Body Control Module "B"
U0163*1 Lost Communication with Navigation Control Module
U023A*2 Lost Communication with Front Camera Module
U1104*3 Lost Communication with Driving Support ECU

*1: for Radio and Display Type or Navigation Receiver Type

*2: w/ Lane Departure Alert System

*3: w/ Pre-crash Safety System




CLEAR FREEZE FRAME DATA


NOTICE:

Clearing the DTCs will also clear the freeze frame data.


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Clear DTCs and freeze frame data.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>HEADUP DISPLAY SYSTEM>DTC CHECK / CLEAR

Body Electrical > Head Up Display > Clear DTCs
50002 390