Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › THROTTLE BODY
RM3210E _51 Engine / Hybrid System _047494 2ZR-FXE ENGINE CONTROL _0241781 THROTTLE BODY G

2ZR-FXE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22210 1.INSPECT THROTTLE BODY ASSEMBLY

a.
A208125C03
2.042,1.677 2.188,1.323 false 2.615,1.677 2.5,1.333 false 0.26,0.229 0.573,0.427 0.313,0.198 10 *a 2.563,1.719 2.875,1.917 0.313,0.198 10 M- 1.927,1.719 2.24,1.917 0.313,0.198 10 M+
*a Component without harness connected
(throttle body assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 25°C (77°F) 0.1 to 1.38 Ω


If the result is not as specified, replace the throttle body assembly.