Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › THROTTLE BODY
RM3210E _51 Engine / Hybrid System _047494 2ZR-FXE ENGINE CONTROL _0241781 THROTTLE BODY G

2ZR-FXE ENGINE CONTROL  THROTTLE BODY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22210 1.INSPECT THROTTLE BODY ASSEMBLY

a.

Put the engine in inspection mode (maintenance mode).

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INSPECTION MODE PROCEDURE


b.

Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range with the A/C switch off.

Standard:

950 to 1050 rpm


NOTICE:
·

Be sure to perform this step with all accessories off.

·

Make sure that the shift lever is in P.




c.

Perform a road test and confirm that there are no abnormalities.